Device sexes

All workers employed floors, must be familiar with the organization of the workplace, trained in the proper handling of materials, machinery and hand tools. Particular attention is given to the correctness of works with hot mastics, flammable and corrosive materials. The workers must perform these works in overalls.

Work with fast-lacquers and other compounds with an intense release of the solvent, as well as work associated with a significant release of dust, to be carried out goggles and respirators.

Do not smoke and enjoy the open fire in the premises where work is underway with flammable content or where they are stored.

To work at high-frequency units for welding linoleum allowed only workers who have studied technology and safety of the welding process.

thickness 20 ... 30 mm. Begin laying the cord from the lighthouse to be installed on the central axis of the premises, or departing from the wall a distance equal to the width of storage along the line of the first series of plates.

When the device flooring for a certain pattern and in the premises of a complex configuration procedure for pre-board layout is applied to the terms of the premises. This enables us to procure the necessary number of incomplete panels.

Entire plate pererubayut manually using boaster and a chisel on a preprinted lines to get Additionally gathered plate. If you must have parent boards with smooth-edged faces of the parties, slabs are cut into a special machine, used for cutting marble slabs.

The correctness of laying constantly checked by ledges and level. The width of joints between panels should be no more than 3 mm. In the design position plate is mounted, reining in their wooden rammer, the lower end of which is lined with felt.

Empty the seams between the plates is filled flush with the plane of the floor slurry with the addition of pigment to color match the color of the solution coating. After setting mortar in the joints coating surface with a damp sawdust or cloth and washed with water.

In the final floor finish of concrete and mosaic tiles to rub with a paste composition: turpentine or gasoline-10, stearin - 2, paraffin-1, Wax - 1, rosin-0, 25.

Floors are natural stone after completion of works should be cleared of the stains by washing the floor with water. It is advisable to rinse combined with manual floor cleaning brushes or scrapers.

In the winter of construction of floors should be kept in heated rooms. Air temperature at floor level and temperature of the underlying layer and the stacked material to be zhny: while installing cable ties, coats and layers of mixtures comprising cement, not below 5 ° C and 8 ° C when the device parquet flooring, and 10 ° C at laying mastic [...]

The quality of the sexes can be guaranteed only in strict compliance with technology all operations on the device of each element of sex. Quality control and acceptance at the end of work on the device each element of sex is carried out before the closure of its overlying layer. Install work done, the requirements of the project and SNIP.
With the acceptance check: evenness and horizontal surface; size element [...]

sexes in the suit premises where increased resistance of the floor to stress and chemical agents. Plastobetonnye composition is prepared based on epoxy, polyester resins and of polymer solutions. The thickness of single-layer coating of plastobetona 10 ... 40 mm. In the coating compositions are placed in ways applicable to the construction of concrete coatings.
Before applying plastobetonnogo cover the concrete base primed appropriate resin with the addition of [...]

used in industrial buildings, where possible significant z'Dzriye load and requires a high compressive strength. These floors are different from ordinary concrete floors because of the concrete mixture additionally added plasticized polnvinilatsetatiuyu emulsion or latex.
Before laying polymer concrete pavement base primed iolivinilatsetatnoy aqueous dispersion. Polimerpe-element-betoiiuyu mixture is placed in the same way as the concrete mixture. [...]

depending on the coating material is divided into mastic polyvinyl acetate (liquid), and polimertsementnobetonnye plastobetonpye. Seamless floors may be of different colors, and polymer coatings - even the type terratso.
Seamless coverings are made of compositions on various binders maquette: water emulsion polymers and polymer solutions in organic solvents.
From water-based formulations most widely used polyvinyl acetate, and polymer-concrete. [...]

coupled with the ability to perceive significant mechanical effects are resistant to various chemicals, as well as to high temperatures. They are hygienic, have high resistance to abrasion.

floors are convenient in operation, do not form dust, incombustibility, but they are not water-resistant and are used in dry areas.
Reasons for these floors may be made of wood or concrete. The surface of the ground for better bonding with ksilolitovym coating should be sufficiently rough.
Ksilolitovye coatings perform in two layers of a mixture of caustic magnesite, sawdust and water solution of chloride [...]

floors are used in industrial workshops, garages. Asphalt concrete pavements are made of hot-mix asphalt with sand and mineral powder.
Asphalt coating arrange for horizontal or inclined surfaces with a given concrete or other hard underlying strata. Before laying the foundation of the mixture is cleaned from dirt, dust and ogruntovyvayut solution of bitumen in kerosene, petrol or white spirit. Asphalt concrete pavement laid [...]

arrange in industrial buildings, where required increased strength of the coating, water resistance and durability. For concrete floors use concrete mixes with additives that increase the strength of concrete floors, which reduce their Attritive. Monolithic concrete floors perform single-layer thickness 25 ... 50 mm. Preparation of the grounds and technology of works of monolithic concrete similar technology laying cement and sand Dolov. In the process of construction of concrete [...]